Semi-Automatic 6-Mold Simple Block-Making Machine BT 2000
This model of block-making machine enables the production of blocks using various materials such as pumice, perlite, LECA, washed sand, and crushed sand. The production mechanism is mobile (egg-laying), and the mold feeding process is performed manually. Material compression is based on vibration, applied in both horizontal and vertical modes. In similar models, such as the tabletop ceiling block-making machine, vibration systems are also used to enhance block quality. The horizontal vibration units of this machine include bearings, ball bearings, and a 3-horsepower motor with 3000 RPM, while the vertical vibration units operate with two 2-horsepower electric motors at 3000 RPM.
Hammer and Compression Mechanism
The machine’s hammer can be designed for either pressing or striking operations. In the pressing model, the operator controls the pressing process using lever valves. In the striking model, the operation is performed automatically, and molds are unloaded using a manual or automatic lock. In more advanced models like the automatic block-making machine, the mortar feeding system is equipped with a silo, which increases production capacity.
|
Specifications of Products Produced by the Semi-Automatic 6-Mold Simple Block-Making Machine BT 2000
|
|
Ceiling and wall (partition) blocks
|
|
Block Dimensions
|
Number per Cycle
|
Production in 8 Hours
|
|
40*20
|
6 Units
|
2000 Units
|
|
40*15
|
8 Units
|
3000 Units
|
|
50*15
|
8 Units
|
3000 Units
|
|
40*10
|
11 Units
|
4000 Units
|
|
50*10
|
11 Units
|
4000 Units
|
Technical Specifications and Consumable Parts of the 6-Mold Block-Making Machine
- Compatible with various environmental conditions
- Imported electric motors (from China, customizable based on request)
- Sensors from HANYOUNG or AUTONICS
- Hydraulic hoses from a Turkish brand (customizable)
- Electrical panel and control components from Pars Fanal brand (customization possible)
- Hydraulic system with European Hydropack valves
- ST 37 steel plates with high strength
- Jack shafts made of Italian hard chrome steel
- Jack piston tubes from Turkish or Italian brands
- Oil-based vibration unit with proprietary company design
Semi-automatic block-making machine is an ideal choice for producing various types of construction blocks with high precision and quality. If you are looking for more cost-effective equipment, manual models such as the manual block-making machine can be a suitable option. For consultation and further information, contact our experts.
